Documents scanned through a multifunction printer's automatic document feeder all have a thin vertical line, but scans placed on the flatbed glass are clean. What is the likely cause?
Les documents numérisés par le chargeur automatique d'une imprimante multifonction présentent tous une fine ligne verticale, alors que les numérisations sur la vitre à plat sont propres. Quelle est la cause probable ?
Answers
AThe scanner driver on the PC needs to be reinstalled from the vendor's websiteLe pilote du scanner sur le PC doit être réinstallé depuis le site du fabricant
BDirt or correction fluid on the feeder's narrow scanning glass stripUne saleté ou du correcteur sur l'étroite bande de vitre de numérisation du chargeur
CThe network is too slow for scanningLe réseau est trop lent pour la numérisation
DThe toner cartridge is emptyLa cartouche de toner est vide
The answer and explanation are in the full bank.
This question is one of 2,831 in the paid banks. Each comes with the correct answer and the reasoning behind it, not just a mark.
Unlock for 5,000 RWFMIFOTRA exam practicealigned to Practice set: Hardware Troubleshooting·2 marks·Medium
More Hardware questions
- A user reports that their PC “is not working”. What should a technician do first?
- A monitor shows nothing. When forming a theory of probable cause, what should the technician check first?
- A technician confirms that a file server's failing disk is causing its errors. Replacing it will take the server offline for an hour. What is the next step in the troubleshooting method?
- After replacing a clogged CPU fan, the technician confirms the PC no longer overheats. What else belongs to this step before documenting?
- What is the final step of the standard troubleshooting method?
- A PC crashes randomly. A technician replaces the RAM, the power supply and the graphics driver all at once, and the crashes stop. What is wrong with this approach?
- A laptop with slow, grinding disk activity is going to the vendor for repair. What should be done before it leaves?
- A technician finds that a server under a vendor warranty has a faulty system board. Opening the chassis would void the warranty. What should they do?